©2013 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUCTIONS
TJ A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50” LED
Thank you for purchasing Poison Spyder
products for your Jeep. Installation is fairly simple
with the right tools and good mechanical abilities.
If you are not condent in your mechanical skills,
please seek the help of a professional to perform
the installation. Please read through these entire
instructions before proceeding with installation.
IMPORTANT: Completely install and remove
these items prior to painting or powder coating.
This will allow you to check for tment or do any
clearancing or tting ahead of time, to reduce
the chance of damage to the nish during nal
installation. Poison Spyder Customs Inc. is not
responsible for costs for or damage to paint or
powder coat nish under any circumstances,
including paint or powder coat of incorrectly
shipped or defective parts.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) Driver Side TJ A-Pillar Light Bar Mount
(1) Passenger Side TJ A-Pillar Light Bar
Mount
(1) Driver Side TJ A-Pillar Rubber Liner
(1) Passenger Side TJ A-Pillar Rubber Liner
(6) 5/16-18 X 1 SS Button Head Cap Screw
INSTALLATION NOTES
• If the Light Bar Mounts were received bare,
they will need to be painted or powder coated
priortonalinstallation.Howeveritisagood
ideatotest-tpriortopaint,inordertoensure
propertmenttoensureagainstdamagetothe
paintorpowdercoatuponnalinstallation.
• Remove the three factory bolts at the
lower corners of the windshield brackets that
correspondtotheholesinthemounts.Donot
remove the lower-most bolt on each side—
leave those in place while installing the light
barmounts.
• Place the supplied rubber liners between the
mounts and the Jeep’sA-pillar beforebolting
them on. Use the supplied 5/16-18 X 1 SS
ButtonHeadCapScrewstosecurethemounts
to the Jeep. Makealignment adjustments to
therubberlinersastheboltsaretightened.
• Install the light bar into the tabs at the top
ofthemountsAFTER the mounts havebeen
installedontotheJeep.Itmaybenecessary
to loosen the mount bolts slightly in order to
slide the light barstuds intothe slots. Once
everything is installed and aligned, re-tighten
allhardware.
• This product is designed exclusively for
mountingtheRigidIndustries50”E-Seriesor
SR-Series LED light bars. No guarantee is
maderegardingtmentofotherbrandsoflight
bars.
• Routing of electrical cables is left to the
installer’s discretion. We have seen several
different methods of routing the cable, we
encourage you to do a search on the web for
ideasandtipsforroutingthecables.
• With the SR-Series (single row) lightbar,If
the light bar produces an annoying whistle or
harmonics at highway speeds, try ipping it
over. We havehad thebest results withthe
lightbarippedsothatthecablesroutedown
thedriver’sside.
Commentaires sur ces manuels